Provo.X measuring module

SKU: 084200000
Category: Products
Manufacturers: GANSHORN Medizin Electronic GmbH

Bronchial Challenge Test System.
The Smart Solution for Methacholine Challenge Tests.

Device integration: Provo.X standalone
Provo.X in PowerCube Body+
Provo.X on PowerCube Diffusion+
Provo.X on PowerCube Spiro+
Other integration according to customer project name
Customer project name: Customer project name

Prices visible after login

Delivery time: 2 - 5 Workdays (DE - int. shipments may differ)

Description

The Provo.X. from GANSHORN is an aerosol dosimeter that enables precise inhalation provocation tests.
The PC-supported system offers reliable tests in direct comparison and flexible adaptation of protocols. Disposable accessories prevent cross-contamination and save time and costs by eliminating disinfection steps.

The most important facts about Provo.X at a glance:

Creation of customized, multi-stage tests with user-friendly software
Constant ideal droplet size throughout the bolus time ensures the aerosol reaches the deep airways
Unlimited protocol storage with up to 14 stages, most of which are pre-installed (e.g. ATS, DGP)
Adjustment of the dose by increasing the active ingredient concentration or changing the nebulization time
A highly effective filter for the exhaled air prevents contamination of the room air.
A three-litre compressed air tank ensures stable nebulization pressure and enables refilling in less than 2 minutes with a low noise level.
Disposable components ensure optimum hygiene and safety

Structure

Thanks to the user-friendly operation of Provo.X, the daily work of your employees is made considerably easier. The clear Provo.X LFX software provides precise information on the examination status. The specially ventilated valve on the nebulizer ensures a constant droplet size during the entire bolus time.

LFX - Software platform

GANSHORN's LFX software provides a user-friendly interface for provocation tests. It enables the selection of standardized provocation steps for controlled measurements and also allows the individual configuration of user-defined provocation series.

Communication:	Bluetooth 4.0 (Low Energy)
Conformity:	assessed according to IEC 60601-1
Power supply:	Sinpro Switching Power Supply Model No.:HPU32A-108
Dimensions with nebuliser:	100 mm x 190 mm x 190 mm (W x H x D)
Dimensions without nebuliser:	100 mm x 100 mm x 80 mm (W x H x D)
Operation: Ambient temperature:	+15 to +30 °C
Operation: Atmosperic pressure:	900 to 1050 hP
Operation: Relative humidity:	20 to 80 % (no condensation)
Ambient temperature:	-20 to +50 °C
Atmospheric pressure:	600 to 1050 hPa
Relative humidity:	10 to 90 % (no condensation)
Module:	BT900US
FCC ID:	SQGBT900US
Data Transfer:	Bluetooth 4.0 Dual mode low energy (LE)
Frequency range:	2.402 ...2480 MHz
Max. power output:	+ 8 dBm (maximum)
Input:	100 to 240 VAC, 48 to 63 Hz, 0,6 to 0,4 A
Output:	24 VDC, 1,25 A max.
PC requirements:	The PC requirements apply to the LFX program being use on stand-alone system. If additional programs are used at the same time, for example ECG software ornetwork software, the requirements increase accordingly
Safety:	Safety Compliance with standard IEC 6236
Operating system:	Microsoft Windows® 10, 64 Bit or 32 Bit
Processor:	Intel® i3 or AMD equivalent Processor 2.00 GHz or better
Performance index:	1.0 (4.0)
RAM:	4 GB
Free memory on hard drive:	20 GB
Graphic:	512 MB of VRAM (1 GB recommended)
Monitor resolution:	1366x768 pixel display with 16-bit color
Rated maximum supply pressure from an external source:	3,45 bar (50psi) min Flow Rate 20l/min
Pressure setting of a pressure relief device provided as part of assembly:	> 3.8 bar (55psi)
Compressor (Option):	230 V / 50 Hz, 100 % oil free